COMPORT PRO: SUSPENSION CONTROL INTRUCTIONS

COMPORT PRO SUSPENSION CONTROLLER — USER INSTRUCTIONS

The COMPORT PRO Suspension Controller is a powerful tool that gives you full control over adjusting the ride height of your air suspension system on your Mercedes-Benz.

Getting Started:

  1. Connect to Your Vehicle using the COMPORT PRO software.

  2. Once connected, locate the “Special Functions” drop-down menu at the top-left corner of the software interface.

  3. Hover over “Special Functions”, then navigate to:

    • “SUSPENSION FUNCTIONS”

    • Select “ADJUST RIDE HEIGHT”

This will open the interface to begin customizing your vehicle’s suspension settings.

Picture below:

 

amr performance comport pro suspension control

Adjusting Ride Height:

While still connected to the vehicle, and with the ignition in accessory mode (your dashboard will be lit and the check engine light will be visible):

  1. Click on “ADJUST RIDE HEIGHT” from the SUSPENSION FUNCTIONS menu.

  2. This will launch the “SUSPENSION MODULE COMMUNICATION” programming interface.

You are now ready to begin adjusting the vehicle’s suspension height settings.

Picture below:

amr performance comport pro suspension control

 

Connecting to the Suspension Module:

  1. In the “SUSPENSION MODULE COMMUNICATION” interface, go to the “Communications” drop-down menu at the top-left corner.

  2. Click “Connect To Vehicle”.

The software will now retrieve your vehicle’s factory suspension level data and display it on the screen for each corner (front/rear, left/right).

Adjusting Ride Height:

  • Use the “INCREASE” and “DECREASE” buttons to fine-tune the ride height for each position.

  • Changes are reflected in real time and can be customized to your desired stance or comfort level.

Picture below:

amr performance comport pro suspension control

Saving & Programming New Ride Height Settings:

Once you’re satisfied with your ride height adjustments:

  1. Return to the “Communications” drop-down menu.

  2. Select “Program New Settings”.

The software will begin programming your new ride height values.
A prompt will appear once the process is complete.

Picture below:

amr performance comport pro suspension control

Note: Changes will not take effect immediately. The Mercedes-Benz suspension module requires time to recalibrate the new settings. You may need to drive the vehicle through a complete cycle before the new height is fully adopted.

You may now safely exit the program.